# Quick Answer: How Are Cabinets Measured??

Measure the width of each wall.

To see how much horizontal space your cabinets can take up, measure the width of each wall from corner to corner and write the numbers on your plan.

Measure your measurements to 36 inches (91 cm) or the height most cabinets are at.

**Contents**hide

## How do you measure replacement cabinets?

1:42

5:38

Suggested clip 120 seconds

How to measure your kitchen for cabinets from CliqStudios.com

Youtube

Start of suggested clip

Proposed end of clip

## How to measure linear feet for kitchen cabinets?

Measure from one corner where the cabinet begins to the other side where the cabinet ends. Linear measurements are usually taken along the wall. Write the measurement in inches on the sketch. With the cabinets tied together, measure the total length from corner to corner.

## How to measure kitchen cabinet doors?

To properly measure a recessed cabinet door (doors that will fit into the cabinet frame), measure the opening as described above, then subtract 1/8 in. from the frame’s width and height to ensure the doors meet. the correct distance. to have.

## What are the standard cabinet sizes?

**Typical dimensions of kitchen cabinets**

- Base cabinets – usually 24 deep (also 12, 15, 18) and 34 1/2 high (countertops add 1 1/2 to get a finished height of 36).
- Wall/wall cabinets – typically 12 deep (also 15, 18, 24) and 12, 15, 18, 24, 30 (typical), 36, 42 high.

## What size sink is suitable for a 24 inch cabinet?

The most common sink sizes are 24, 30 and 33 inches. Tiny houses and apartments will probably fit the 24-inch size, small but functional enough to wash pots and pans. Common 24-inch sink molds are square and D-bowl. 24-inch-wide sinks should be placed in at least one 27-inch under-sink cabinet.

## What is the standard size of the cabinets?

The standard cabinet depth is 12 inches for manufacturers who work in inches and 30 cm for manufacturers who work with metric measurements. The standard widths for wall cabinets correspond to the widths available for base cabinets, which are 12, 15, 18, 24, 30, 36 inches and 30, 40, 50, 60, 80 cm. These may vary by manufacturer.

## What is the normal height of the top kitchen cabinets?

This is because 18″ of space between base cabinets and wall cabinets is considered the optimal workspace, and for base cabinets that are typically 36″ high (with countertops) and 24″ deep, 54″ and taller wall cabinets provide 18″ of space.

## What is the size of standard kitchen cabinet doors?

Most cabinet doors can be opened up to a maximum of 60 cm – including dishwasher doors. The oven doors can be slightly smaller – usually around 50 cm.

Photo in the “Flickr” article `https://www.flickr.com/photos/virginiaretail/42839118425`